19301PNA003-GENUINE HONDA ENGINE COOLANT THERMOSTAT W/ GASKET 19301-PNA-003

 

19301PNA003-NEW GENUINE OEM HONDA CIVIC CR-V ENGINE COOLANT THERMOSTAT W/ GASKET 19301-PNA-003 SUPPLIED BY AZ PARTS NOW

Affordable and Reliable Engine Cooling Solution for Honda Civic and CR-V Models

If you own a Honda Civic or CR-V and are in need of a new engine coolant thermostat, look no further than the 19301PNA003 supplied by AZ Parts Now. This genuine OEM Honda thermostat is designed specifically for these popular Honda models, ensuring a perfect fit and reliable performance. In this article, we will discuss the features and benefits of the 19301PNA003 thermostat, as well as its importance in maintaining optimal engine temperature. Whether you're a DIY enthusiast or a professional mechanic, this thermostat is a cost-effective solution for your engine cooling needs.

The Importance of Engine Coolant Thermostats 2. Features and Specifications of the 19301PNA003 Thermostat 3. How to Install the 19301PNA003 Thermostat 4. FAQs About the 19301PNA003 Thermostat 5. Conclusion

THE IMPORTANCE OF ENGINE COOLANT THERMOSTATS

Engine coolant thermostats play a crucial role in regulating the flow of coolant through the engine. They are responsible for maintaining the optimal operating temperature of the engine, ensuring efficient combustion and performance. Without a properly functioning thermostat, the engine may overheat, leading to potential damage and decreased performance.

The 19301PNA003 thermostat is designed to precisely control the flow of coolant, allowing it to circulate when the engine is at its optimal temperature and restricting it when the engine is too cold. This prevents the engine from running too hot or too cold, ensuring optimal performance and longevity.

FEATURES AND SPECIFICATIONS OF THE 19301PNA003 THERMOSTAT

The 19301PNA003 thermostat comes with a gasket, which helps to create a tight seal and prevents coolant leaks. This ensures that the coolant circulates properly throughout the engine without any wastage or loss.

Key features and specifications of the 19301PNA003 thermostat include:

• Genuine OEM Honda thermostat: The 19301PNA003 thermostat is a genuine Honda part, manufactured to the highest quality standards. It is designed to fit perfectly in Honda Civic and CR-V models, ensuring compatibility and reliable performance.

• OEM Part Number: The part number for the 19301PNA003 thermostat is 19301-PNA-003. This unique identifier helps ensure that you receive the correct thermostat for your Honda vehicle.

• Material: The thermostat is made from high-quality materials, ensuring durability and a long service life. It is designed to withstand the harsh conditions of the engine bay and provide reliable performance.

• Easy Installation: The 19301PNA003 thermostat is designed to be easy to install, making it suitable for both DIY enthusiasts and professional mechanics. A smooth installation process ensures that your vehicle will be back on the road in no time.

HOW TO INSTALL THE 19301PNA003 THERMOSTAT

Installing the 19301PNA003 thermostat is a straightforward process that can be done by following a few simple steps. Here's a step-by-step guide to help you install the thermostat in your Honda Civic or CR-V:

1. Begin by ensuring that the engine is cool and the vehicle is parked on a level surface.

2. Open the hood and locate the coolant reservoir and radiator cap. Take caution, as the coolant can be hot and cause burns.

3. Place a drain pan under the radiator drain valve and open it to drain the coolant. Dispose of the old coolant properly according to local regulations.

4. Once the coolant has been drained, locate the thermostat housing. It is usually situated near the engine block and connected to the upper radiator hose.

5. Remove the bolts or screws securing the thermostat housing and lift it away from the engine.

6. Carefully remove the old thermostat from the housing, taking note of its orientation.

7. Clean the housing and thermostat mating surfaces to ensure a proper seal.

8. Install the new 19301PNA003 thermostat into the housing, ensuring that it is oriented correctly according to the manufacturer's instructions.

9. Apply a thin layer of gasket sealant to the thermostat housing gasket to ensure a tight seal.

10. Place the thermostat housing back onto the engine and secure it with the bolts or screws.

11. Refill the coolant system with the appropriate coolant mixture, following the manufacturer's recommendations.

12. Start the engine and allow it to warm up. Check for any coolant leaks and make sure that the thermostat is functioning properly.

By following these steps, you can install the 19301PNA003 thermostat in your Honda Civic or CR-V with ease, ensuring reliable engine cooling performance.

FAQS ABOUT THE 19301PNA003 THERMOSTAT

1. Q: How often should I replace the engine coolant thermostat?

   A: It is recommended to replace the thermostat every 50,000 to 100,000 miles or as per the manufacturer's maintenance schedule.

2. Q: Can I install the 19301PNA003 thermostat myself?

   A: Yes, the 19301PNA003 thermostat can be installed by DIY enthusiasts with basic mechanical skills. However, if you are not comfortable performing the installation yourself, it is always advisable to seek professional assistance.

3. Q: Is the 19301PNA003 thermostat compatible with all Honda Civic and CR-V models?

   A: Yes, the 19301PNA003 thermostat is designed specifically for Honda Civic and CR-V models. However, it is always recommended to cross-check the part number and compatibility with your vehicle before making a purchase.

4. Q: What is the warranty period for the 19301PNA003 thermostat?

   A: The warranty period for the thermostat is determined by the manufacturer and may vary. It is advisable to check with the supplier or manufacturer for specific warranty information.

5. Q: Can I use aftermarket thermostats instead of the OEM thermostat?

   A: While aftermarket thermostats may be available at a lower cost, they may not offer the same level of quality, reliability, and compatibility as genuine OEM thermostats. It is recommended to use the OEM thermostat for optimal performance.

6. Q: Where can I purchase the 19301PNA003 thermostat?

   A: The 19301PNA003 thermostat is supplied by AZ Parts Now, a reputable supplier of auto parts and accessories. It can be purchased online through their website or through authorized dealers.

CONCLUSION

The 19301PNA003 thermostat supplied by AZ Parts Now is an affordable and reliable engine coolant thermostat designed specifically for Honda Civic and CR-V models. With its genuine OEM designation, this thermostat guarantees quality, reliability, and perfect fit for your vehicle. By maintaining optimal engine temperature, the 19301PNA003 thermostat plays a crucial role in preventing overheating and ensuring efficient combustion. Whether you're a DIY enthusiast or a professional mechanic, this thermostat is an essential component for your engine cooling system. Experience the benefits of precise temperature control and reliable performance with the 19301PNA003 thermostat.